Quote:
Originally Posted by badass1000
Very nice bike. 
Cool video too. Were you on 6psi the whole video?
What boost were the two dyno graphs done at?
:bumping: |
Thanks Jeremy
I didn't have a boost controller in that video. That was 6.5psi (actual from Cyberdyne peak recall on the boost gauge) with a 8.7psi spring (Little Blue) in the Tial WG.
The dyno graph had just the Small Red (5.8psi) spring in the Tial WG, and the 251whp was with 8.7 psi (?) on race gas w/
AMS-1000
. I've since sold the
AMS-1000
and am installing either the Large Red (11.60 psi) or Large Green (13.05psi) spring and shooting for 10psi w/race gas and water injection. Not sure what the limit is going to be with the stock fuel system. Any advice you give me would be appreciated
I haven't had luck with getting the full boost from the spring to register on the boost gauge, which makes me think the gate is opening too soon, so I'm having to overshoot the spring by a couple of psi.
I've got some pesky Supra's and TT Viper's to play with at Tx2K9 in March.
Jason