These offset clamps are on every bike built by
NLR
,
DME
and many other top builders in the industry. Safety is of the utmost concern so we have made our clamps with a smaller bore size which requires the fork tubes to be machined down. This allows the forks to travel into the clamps and always ensures a hard grip by all pinch bolts. On alot of clamps they do not do this and the bottom clamp assembly rides onto the reduced dimension of the fork tube only allowing 1 pinch bolt to actually hold the tube on the bottom clamp. Beautiful machine work in combination with engineered stability and proven performance!
The worlds quickest drag radial bikes use these clamps!
You must use gsxr1000 fork tubes with these clamps. The stem uses a early model gsxr1000 stem nut or hayabusa stem nut!
These clamps are cnc machined and solidworks designed.
We offer clamps that are legal for the AMA DRAGBIKE and MIROCK series.
Clamps Assemblies Available:
Prostreet Clamps
1/2 in x 49mm short neck and standard stem clamp - .765 +
(these require machining of fork tubes top bore is 49 mm and bottom clamp bore is 51.8 mm)
3/4 in x 49mm short neck and standard stem offset clamps - .500
For those who need to be between a 1/2 and 1 inch offset you now have the ability to maximize your set up!
(these require machining of fork tubes top bore is 49 mm and bottom clamp bore is 51.8 mm)
1 in x 50mm- front wheel -.250
Price for clamps is $699.00
They come with a:
* Cnc stem
* factory seal, race and bearing assembly
* aluminum spacer- on standard stem
* cnc machined top clamp
* cnc machined bottom clamp
TOTW/F/M Award(s): 1
Offset clamps
Linear Mode
